Snmp-Server Host - Avaya G250 Reference

CLI Commands
Context
general
Example
G350-001(super)# snmp-server group 12groupRO v3 auth read view1 notify
view2
Related commands - SNMP access configuration
ip snmp-server,
snmp, show snmp
snmp user, show snmp user
community, snmp-server
view
Related commands - SNMP trap configuration
clear snmp trap,
enable notifications,
Related commands - Dynamic trap manager
snmp-server dynamic-trap-manager

snmp-server host

Use the snmp-server host command to identify an SNMP management server, and specify
the kind of messages it receives. Use the no form of the command to remove the specified
server, or to disable a particular set of notification types.
Note:
If you use the no snmp-server host command without a notification type list,
Note:
all notification types are disabled.
Syntax
snmp-server host {host_address | hostname} {traps | informs} {{{v1 |
v2c} community} | {v3 [auth | noauth | priv] user}} [udp-port port]
[notification-type-list]
no snmp-server host host_address [{traps|informs}
notification-type-list]
744 Avaya G250 and Avaya G350 CLI Reference
set snmp community,
engineID, show snmp
summary,
engineID, snmp-server
set port trap, set snmp
snmp-server host,
set snmp retries, set snmp
group, show snmp
show snmp usertogroup,
remote-user,
trap, show snmp, snmp trap
snmp-server informs
timeout, show port
retries, show snmp timeout,
show snmp view,
snmp-server user, snmp-server
link-status, snmp-server
trap, show
show
snmp-server