Ppp Ipcp Dns Request; Ppp Pap Refuse - Avaya G250 Reference

CLI Commands

ppp ipcp dns request

Use the ppp ipcp dns request command to enable requesting DNS information from the
remote peer during the PPP/IPCP session. Use the no form of this command to restore the
default value, which is not to request DNS information during the PPP/IPCP session.
Note:
The DNS Resolver uses the DNS servers discovered using this command.
Note:
Syntax
[no] ppp ipcp dns request
User level
read-write
Context
Interface: Dialer, FastEthernet (PPPoE only)
Example
G350-001(config-if:FastEthernet 10/2)# ppp ipcp dns request
Related commands
ip address negotiated

ppp pap refuse

Use the ppp pap refuse command to prevent authentication with PAP, even when a
pap-sent password is configured.
Syntax
ppp pap refuse
no ppp pap refuse
User level
Read-write
Context
Interface: Fast Ethernet
350 Avaya G250 and Avaya G350 CLI Reference