Set Spantree Priority - Avaya G250 Reference

CLI Commands

set spantree priority

Use the set spantree priority command to set the bridge priority for the spanning tree.
Note:
This command is not supported by the G250.
Note:
Syntax
set spantree priority bridge_priority
Parameters
Parameter
bridge_
priority
User level
read-write
Context
general
Example
To set the bridge priority to 4096:
G350-001(super)# set spantree priority 4096
Bridge priority set to 4096.
Related commands
set port spantree,
spantree priority,
forward-delay,
spantree version,
494 Avaya G250 and Avaya G350 CLI Reference
Description
The number representing the
priority of the bridge
set port spantree cost,
set spantree default-path-cost,
set spantree hello-time,
show spantree
Possible Values
0 (high)-65535 (low) in
increments of 4096
set port spantree force-protocol-migration,
set spantree
set spantree max-age,
Default
Value
enable/disable, set spantree
set spantree tx-hold-count,
set port
set