Snmp Trap Link-Status - Avaya G450 Cli Reference Manual

SNMP Rec-Addr
129.22.22.22
UDP port: 162 DM
129.11.33.44
UDP port: 162
Related Commands - SNMP access configuration
ip snmp, set snmp
engineID, show snmp
snmp usertogroup,
snmp-server group,
Related Commands - SNMP trap configuration
set port trap, set snmp trap enable | disable
show port trap,
snmp-server informs
Related Commands - Dynamic trap manager
snmp-server dynamic-trap-manager

snmp trap link-status

Use the snmp trap link-status command to enable Link Up and Link Down traps. Use
the no form of this command to restore the default value, interface traps deactivated.
Syntax
[no] snmp trap link-status
User Level
read-write
Context
Interface: Console, Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR L2, DS1 FR-SUB L2,
DS1 FR-SUB L2-L3, USP PPP L2, USP PPP L2-L3, USP FR L2), FastEthernet (L2, L2-L3,
PPP L2, PPP L2-L3), Tunnel (L2, L2-L3), Dialer (L2, L2-L3), USB-modem
Example
To enable Link Up and Link Down traps:
G450-001(super-if:FastEthernet 10/2)# snmp trap link-status
Mode Level
l
v1 noauth
v2c noauth
community, set snmp
group, show snmp
show snmp view,
snmp-server remote-user,
snmp trap link-status,
Notification
all
all
retries, set snmp timeout,
retries, show snmp
snmp-server community,
snmp-server
auth, set snmp trap enable | disable
snmp-server enable notifications,
SNMP trap configuration
Trap/ User
Inform Name
trap ReadCommN
inform WriteCommN
show snmp, show snmp
timeout, show snmp
snmp-server engineID,
user, snmp-server view
frame-relay,
snmp-server
Issue 1 January 2008
user, show
host,
1091