Ip Access-Control-List - Avaya G250 Reference

CLI Commands
User level
read-write
Context
Interface: Serial (USP FR L2, USP PPP L2, USP PPP L2-L3)
Example
To invert the transmit clock signal on an interface:
G350-001(if:Serial 2/1:1)# invert txclock
Related commands
bandwidth, idle-character,

ip access-control-list

Use the ip access-control-list command to enter configuration mode for the specified
policy access control list. If the specified list does not exist, the system creates it and enters its
configuration mode.
Syntax
ip access-control-list list_number
Parameters
Parameter
list_number
User level
read-write
Context
general
Example
To create access control list 320 and enter its configuration mode:
G350-001(super)# ip access-control-list 320
G350-001(ACL 320)#
220 Avaya G250 and Avaya G350 CLI Reference
ignore dcd, interface
Description
The Access Control list number
serial, nrzi-encoding,
Possible
Values
300-399
transmitter-delay
Default
Value
300