Tcp Destination-Port - Avaya G250 Reference

CLI Commands

tcp destination-port

Use the tcp destination-port command to define a destination port with the TCP protocol
for which to apply the current rule. Use the no form of the command to specify that the rule
applies to all ports other than the defined port.
Note:
Issuing this command also sets the protocol to be TCP, if it is not already.
Note:
Syntax
tcp destination-port any | {{eq | lt | gt}
{port_name | port_number}} | {range start_port end_port}
Parameters
Parameter
any
eq
lt
gt
port_name
port_number
range
start_port
end_port
762 Avaya G250 and Avaya G350 CLI Reference
Description
Keyword that specifies to apply the
rule to a port with any name or
number
Keyword that specifies to apply the
rule to a port whose name or
number matches exactly to the
specified name or number
Keyword that specifies to apply the
rule to a port whose name or
number is less than the specified
name or number
Keyword that specifies to apply the
rule to a port whose name or
number is greater than the
specified name or number
The name of the port for which to
apply the rule
The number of the port for which
to apply the rule
Keyword indicating that a range of
ports is specified
The start of a port range for which
to apply the rule
The end of a port range for which
to apply the rule
Possible Default
Values Value