Set Port Spantree - Avaya G250 Reference

CLI Commands
Context
general
Example
To specify a delay of 100 milliseconds before switching to the backup port, and a requirement
that the primary port be up for 20 milliseconds before control is returned:
G350-147# set port redundancy-intervals 100 20
Related commands
set port redundancy,

set port spantree

Use the set port spantree command to enable or disable spanning tree for specific ports.
Note:
This command is not supported by the G250.
Note:
Syntax
set port spantree {enable|disable} [module/port]
Parameters
Parameter
enable
disable
module
port
User level
read-write
Context
general
460 Avaya G250 and Avaya G350 CLI Reference
set port redundancy on|off,
Description
Keyword specifying that spanning tree mode
should be enabled
Keyword specifying that spanning tree mode
should be disabled
The module number
The port number
show port redundancy
Possible
Values
Default
Value