Show Faults - Avaya G250 Reference

CLI Commands
Related commands
add trunk-group,
trunk-group, remove
extension, set
survivable-call-engine,
show ip-codec-set,
survivable-call-engine,

show faults

Use the show faults command to display the active faults for the media gateway.
Syntax
show faults
User level
read-only
Context
general
Example
To display the current fault list:
G350-001(super)# show faults
CURRENTLY ACTIVE FAULTS
-------------------------------------------------------------------
-- Hardware Faults --
+ Multiple fans outage, 01/01-18:26:35.00
+ PSU fan brief outage, 01/01-18:26:35.00
-- MGP Faults --
+ No controller found, 01/01-00:00:01.00
Related commands
set utilization cpu,
show restart-log,
voltages, test led
558 Avaya G250 and Avaya G350 CLI Reference
clear ars-fac, clear
trunk-group, save
extension-password, set
set trunk-group,
show last-pim-update,
show trunk-group,
show mg list_config,
show status, show
survivable-config, clear
config, set ars-fac,
ip-codec-set, set max-ip-registrations,
show ars-fac, show
show max-ip-registrations,
survivable-call-engine
show mgc, show mm,
system, show temp, show
dial-pattern, clear extension,
set date-format, set dial-pattern,
set
date-format, show dial-pattern,
show
show module, show
timeout, show utilization,
clear
set
recovery,
show