Related commands
banner
login,
banner
length,
terminal width
show boot bank
Use the show boot bank command to display the software bank from which the device boots
at the next boot process.
Syntax
show boot bank
User level
read-only
Context
general
Example
To display the bank from which booting currently takes place:
G350-001(super)# show boot bank
Boot bank set to bank-a
Related commands
copy ftp
EW_archive,
EW_archive,
copy tftp
show download software
show cam
Use the show cam command to display the CAM table entries for a specific module and port. If
no module or port is specified, the system displays all CAM table entries.
Note:
MACs associated with LAGs appear under the LAG ID, not under the LAG port.
Note:
Syntax
show cam [module[/port]]
post-login,
clear
screen, hostname, line,
copy ftp
module,
copy ftp
module,
copy tftp
SW_imageA,
status,
show image version
Alphabetical listing of CLI commands
show banner
SW_imageA,
copy ftp
copy tftp
SW_imageB, dir,
login,
terminal
SW_imageB,
copy tftp
set boot
bank,
Issue 1.1 June 2005
513