Copy Startup-Config Tftp - Avaya G250 Reference

Related commands
copy ftp startup-config,
startup-config,
startup-config,
show erase status,

copy startup-config tftp

Use the copy startup-config tftp command to upload the current configuration to a file
on a TFTP server. Uncommitted changes to the configuration are not included.
To use this command, you need to have an active TFTP server. If Avaya Network Manager is
running, you do not require an additional TFTP server.
Note:
After you change the configuration, run the copy running-config
Note:
startup-config command to save the changes. If you do not save the
changes, the device loses the changes when you reset it.
Syntax
copy startup-config tftp filename ip
Parameters
Parameter
filename
ip
User level
read-write
Context
general
Example
To upload the current configuration to the g350.cfg file on the TFTP server at IP address
135.64.10.33:
G350-001(super)# copy startup-config tftp g350.cfg 135.64.10.33
copy running-config
copy running-config tftp,
erase startup-config, nvram
show logging file
Description
Name of file to create on TFTP server
IP address of TFTP server
ftp, copy running-config
copy startup-config
initialize, show copy
condition, show running-config,
Alphabetical listing of CLI commands
scp, copy running-config
ftp, copy startup-config
status, show download
show startup-config
Possible Default
Values Value
Issue 1.1 June 2005
tftp, copy tftp
status,
127