Frame-Relay Traffic-Shaping; Framing - Avaya G250 Reference

frame-relay traffic-shaping

Use the frame-relay traffic-shaping command to turn on/off traffic shaping and
Frame-Relay fragmentation. Virtual Channels that are not explicitly assigned to a map-class
frame-relay, are assigned to the default map-class frame-relay.
Use the no form of this command to turn off traffic shaping.
Syntax
[no] frame-relay traffic-shaping
User level
read-write
Context
Interface: Serial (DS1 FR L2, USP FR L2)
Example
To enable traffic shaping on the interface:
G350-001(if:Serial 2/1:1)# frame-relay traffic-shaping
Related commands
encapsulation,
frame-relay lmi-n393dte,

framing

Use the framing command to specify the frame type for an E1 or T1 data line. Use the no form
of the command to restore the controller to the default frame type.
Syntax
framing frame_type
no framing
frame-relay interface-dlci,
frame-relay
frame-relay lmi-n391dte,
lmi-type, frame-relay priority-dlci-group,
Alphabetical listing of CLI commands
frame-relay lmi-n392dte,
ip address
Issue 1.1 June 2005 201