tunnel mode
Use the tunnel mode command to specify the encapsulation method of the tunnel. This
command is only included for future development, and for conformity with other systems.
Currently, the tunnel can only perform GRE encapsulation.
Syntax
tunnel mode encapsulation
no tunnel mode
Parameters
Parameter
encapsulation
User level
read-write
Context
Interface: Tunnel (L2, L2-L3)
Example
G350-001(super)# tunnel mode gre
Related commands
interface
FastEthernet,
tunnel path-mtu-discovery
Use the tunnel path-mtu-discovery command to specify that the tunnel maintain
information on the maximum allowable packet size (smallest MTU) for the entire routing path of
the tunnel. Packets entering the tunnel that are larger than the tunnel's MTU are either
fragmented, or sent back with a request for fragmentation (depending on the DF bit of the
packet).
Use the age-timer parameter to force the tunnel to update the MTU after a specified number of
minutes. Specify infinite to make the MTU value permanent (no updating).
Description
The encapsulation method of the tunnel
interface
tunnel,
tunnel dscp
Alphabetical listing of CLI commands
Possible
Values
gre
Issue 1.1 June 2005
Default
Value
785