End-Ip-Addr - Avaya G250 Reference

Example
G350-001(config-isakmp:1)# encryption 3des
Related commands
authentication,
crypto isakmp policy

end-ip-addr

Use the end-ip-addr command to set the end IP address of a DHCP pool IP address range.
For manual/reservation leasing, set the end IP address to be identical to the start IP address.
Syntax
[no] end-ip-addr ip-addr
Parameters
Parameter
ip-addr
User level
read-write
Context
dhcp pool
Example
G350-001(DHCP 5)# end-ip-addr 135.64.120.4
Related commands
bootfile, client-identifier, default-router, dns-server, domain-name, lease, name, next-server,
option, server-name,
vendor-specific-option
crypto isakmp policy,
Description
The end IP address of
the DHCP pool IP
address range.
show ip dhcp-pool, start-ip-addr, subnet-mask, value,
description (ISAKMP
Possible Values
The end IP address must be larger
than the start IP address.
The number of IP addresses in one
pool cannot exceed 256.
Alphabetical listing of CLI commands
policy), group, hash, lifetime,
Issue 1.1 June 2005
show
Default
Value
0.0.0.0
183