Show Startup-Config - Avaya G250 Reference

Alphabetical listing of CLI commands

show startup-config

Use the show startup-config command to show the NVRAM based configuration loaded
automatically at startup.
Syntax
show startup-config
User level
read-only
Context
general
Example
To display the startup configuration:
G350-001(super)# show startup-config
G350-001(super)#
! version 0.0.13
ds-mode t1
interface Vlan 1
icc-vlan
ip address 172.16.1.139 255.255.255.240
pmi
interface FastEthernet 10/2
interface Console
ip address 10.3.0.1 255.255.255.0
Related commands
copy ftp startup-config, copy running-config ftp, copy running-config scp, copy running-config
startup-config, copy running-config tftp, copy startup-config ftp, copy startup-config scp, copy
startup-config tftp, copy tftp startup-config, erase startup-config, nvram initialize, show copy
status, show download status, show erase status, show logging file condition, show
running-config
Issue 1.1 June 2005 713