Reset - Avaya G250 Reference

CLI Commands

reset

Use the reset command to reset a specified system resource. The command performs a hard
reset of the specified entity, returning any selectable parameters to their startup configuration
values and setting all hardware and firmware to a known state.
Note:
If the Supervisor modules are in Active/Standby configuration, resetting the active
Note:
supervisor causes the standby supervisor to take over and become active.
Note:
The reset command does not work while the configuration is being saved.
Note:
Syntax
reset [module module_number | voip | chassis]
Parameters
Parameter
module
module_number
voip
chassis
User level
read-write
Context
general
Example
To reset the VoIP engine:
G350-001(super)# reset voip
This command will perform a hard reset.
Do you want to continue (Y/N)? y
Related commands
exit, set logout,
368 Avaya G250 and Avaya G350 CLI Reference
Description
Keyword indicating to reset a module
The module to reset
Keyword indicating to reset the VoIP engine
Keyword indicating to reset the Avaya G250
and Avaya G350 Media Gateways and all its
media modules
show logout
Possible Default
Values Value