Rtp-Stat Qos-Trap-Rate-Limit - Avaya G250 Reference

rtp-stat qos-trap-rate-limit

Use the rtp-stat qos-trap-rate-limit command to configure the QoS trap rate limiter.
The trap rate limiter limits the rate at which QoS traps are sent to the SNMP trap manager on
the MGC. The trap rate limiter uses a token bucket scheme, in which traps are sent only if there
are tokens in a virtual bucket. Tokens are added to the bucket every 'token interval,' which sets
the maximum long term trap rate. Each time a trap is sent, the number of tokens in the bucket
decrements. The 'bucket size' is the maximum number of tokens that the bucket can hold. The
bucket size limits the trap burst size.
Syntax
rtp-stat qos-trap-rate-limit token-interval bucket-size
Parameters
Parameter
token-interval
bucket-size
User Level
read-write
Context
General
Example
G350-???(super)# rtp-stat qos-trap-rate-limit 10 50
Related commands
rtp-stat clear, rtp-stat
rtp-stat service,
sessions, show rtp-stat
Description
The interval, in hundredths of seconds,
between additions of a token to the bucket
The maximum number of tokens stored in the
bucket
event-threshold,
rtp-stat threshold, show rtp-stat
summary, show rtp-stat thresholds
rtp-stat fault, rtp-stat min-stat-win,
config, show rtp-stat
Alphabetical listing of CLI commands
Possible
Values
10-100000
1-1000
rtp-stat qos-trap,
detailed, show rtp-stat
Issue 1.1 June 2005
Default
Value
1000
5
381