Tcp Established - Avaya G250 Reference

User level
read-write
Context
ip pbr-list ip-rule, ip capture-list ip-rule, ip qos-list ip-rule, ip access-control-list ip-rule
Example
To specify that the current rule applies to all packets whose destination port is 300:
G350-001(ACL 330/ip rule 22)# tcp destination-port eq 300
Related commands - Policy-based routing
destination-ip, dscp (policy, policy-based routing, packet
capture-list, source-ip,
Related commands - Policy
composite-operation, destination-ip,
show composite-operation,
source-port, udp

tcp established

Use the tcp established command to specify that the current rule applies only to packets
that are part of an established TCP session. Use the no form of the command to specify that the
current rule applies to any TCP packets.
Note:
The tcp established and no tcp established commands also set the IP
Note:
protocol to TCP.
Syntax
[no] tcp established
User level
read-write
Context
ip access-control-list ip-rule
tcp source-port,
dscp (policy, policy-based routing, packet
show dscp-table,
destination-port, udp source-port
Alphabetical listing of CLI commands
sniffing), icmp, ip-protocol,
udp destination-port, udp source-port
show ip-rule, source-ip,
show ip
sniffing), icmp,
tcp established, tcp
Issue 1.1 June 2005 763