Fdl - Avaya G250 Reference

Context
Interface: Serial (DS1 PPP L2-L3, DS1 PPP L2, DS1 FR L2, USP FR L2, USP PPP L2,
USP PPP L2-L3), FastEthernet (L2, L2-L3) - when traffic shaping is configured
Example
G350-001(super-if:FastEthernet 10/2)# fair-voip-queue
Related commands - WFVQ
fair-queue-limit, voip-queue,

fdl

Use the fdl command to define the type of Facility Data Link loopback that the remote line is
requested to enter. Use the no form of the command to disable FDL.
Note:
This command can only be used when ESF framing is defined.
Note:
Syntax
fdl fdl_mode
no fdl
Parameters
Parameter
fdl_mode
User level
read-write
Context
Interface: Controller (T1)
Example
To set the FDL type to ansi:
G350-001(controller:5/1)# fdl ansi
voip-queue-delay
Description
The FDL type
Alphabetical listing of CLI commands
Possible Values Default Value
ansi, att, both
Issue 1.1 June 2005 189