CLI Commands
ip broadcast-address
Use the ip broadcast-address command to update the interface broadcast address.
Syntax
ip broadcast-address bc_addr
Parameters
Parameter
bc_addr
User level
read-write
Context
Interface: Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB L3,
USP PPP L2-L3, USP PPP L3), FastEthernet (L2-L3, L3), VLAN (L2-L3, L3)
Example
To set the broadcast address for the VLAN 1 interface to 192.168.255.255:
G350-001(if:Vlan 1)# ip broadcast-address 192.168.255.255
Related commands
description
(interface),
serial,
interface
show ip interface brief
ip capture-list
Use the ip capture-list command to enter the specified capture-list context. If the
specified capture-list does not exist, it is created.
Syntax
ip capture-list capture_list_id
no ip capture-list capture_list_id
228 Avaya G250 and Avaya G350 CLI Reference
Description
The broadcast IP address
interface
Console,
tunnel,
interface
usb,
Possible Values
interface
FastEthernet,
interface
vlan,
ip
address,
Default Value
interface
Loopback,
ip
admin-state, load-interval,
interface