Next-Hop (Object Tracking) - Avaya G250 Reference

CLI Commands

next-hop (object tracking)

Use the next-hop command to specify the next hop for the RTR probes, bypassing normal
routing. Use the no form of this command to disable setting of the next-hop.
Note:
The next-hop command is disabled by default.
Note:
Note:
The
Note:
RTR configuration if you specify the next hop for the RTR probes, and
automatically removed from the configuration if you specify no next-hop.
Syntax
[no] next-hop interface interface-name [mac-address mac-address]
Parameters
Parameter
interface-name
mac-address
User level
read-write
Context
rtr type
Examples
G350-001(config-rtr icmp 1)# next-hop FastEthernet 10/2 interface-name
00:04:d0:af:12:4 mac-address
G350-001(config-rtr icmp 1)# next-hop Serial 2/1:1 interface-name
334 Avaya G250 and Avaya G350 CLI Reference
interface-keepalive bypass-logic
Description
The next-hop interface.
The MAC address of the
interface.
Applies to Ethernet interfaces
only:
FastEthernet not running
PPPoE
VLAN
command is automatically appended to the
Possible Values Default Value