Ip Distribution Access-Default-Action - Avaya G250 Reference

Context
Interface: Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB L3,
USP PPP L2-L3, USP PPP L3), FastEthernet (L2-L3, L3), VLAN (L2-L3, L3)
Related commands
interface FastEthernet,

ip distribution access-default-action

Use the ip distribution access-default-action command to set the default action
for a specific RIP distribution policy list.
Syntax
ip distribution access-default-action list_number default_action
Parameters
Parameter
list_number
default_action
User level
read-write
Context
general
Example
To specify the default action for distribution policy list 1 is to deny packets:
G350-001(super)# ip distribution access-default-action 1
default-action-deny
interface serial, interface
Description
The distribution list number
The default action
Alphabetical listing of CLI commands
vlan, ip netbios-rebroadcast
Possible Values
1-99
default-action-deny,
default-action-permit
Default
Value
Issue 1.1 June 2005 241