Tunnel Checksum - Avaya G250 Reference

Context
general
Example
To display the list of available commands to two levels:
G350-001(super)# tree 2
> arp
> arp timeout
> banner login
banner login > line
> banner post-login
banner post-login > line
--type q to quit or space key to continue--

tunnel checksum

Use the tunnel checksum command to specify that the router adds a checksum bit to the
outgoing GRE packet, for data verification. Use the no form of the command to specify that no
checksum bit should be added.
Syntax
[no] tunnel checksum
User level
read-write
Context
Interface: Tunnel (L2, L2-L3)
Example
G350-001(super)# tunnel checksum
Related commands
keepalive (GRE
source, tunnel ttl
tunnel), tunnel destination,
Alphabetical listing of CLI commands
tunnel key, tunnel path-mtu-discovery, tunnel
Issue 1.1 June 2005 781