Set Vlan - Avaya G250 Reference

CLI Commands
Example
To enable CPU utilization measurements on module 10:
G350-100# set utilization cpu 10
CPU utilization is set on module 10
Related commands
set utilization cpu,
recovery, show
utilization, show

set vlan

Use the set vlan command to create or modify a VLAN.
Syntax
set vlan vlan_id [name vlan_name]
Parameters
Parameter
vlan_id
name
vlan_name
User level
read-write
Context
general
Example
To create VLAN number 3, named "gregory":
G350-147# set vlan 3 name gregory
VLAN id 3, vlan-name gregory created.
508 Avaya G250 and Avaya G350 CLI Reference
show faults, show mg
restart-log, show status,
voltages, test led
Description
The VLAN number
Keyword that allows naming or
renaming the VLAN
The VLAN name
list_config, show mgc,
show system, show temp,
Possible Values
1-3071
string from 1-32
characters
show mm, show module,
show timeout, show
Default
Value
show