Set Lldp Tx-Interval; Set Logging File - Avaya G250 Reference

CLI Commands

set lldp tx-interval

Use the set lldp tx-interval command to configure the interval at which the device
transmits LLDP frames.
Use the no form of the command to delete a number from the dial list.
Syntax
set lldp tx-interval seconds
Parameters
Parameter
seconds
User level
read-write
Context
General
Example
G250-001(super)# set lldp tx-interval 5000
Related commands
set lldp re-init-delay,
lldp, set port lldp
config

set logging file

Use the set logging file command to manage the logging of system messages to
non-volatile memory (NVRAM).
Syntax
set logging file {enable | disable | condition {all | MsgFacility} {none |
severity}}
416 Avaya G250 and Avaya G350 CLI Reference
Description
The interval at which the device transmits LLDP
frames in seconds
set lldp system-control,
tlv, show lldp, show lldp
set lldp tx-delay, set lldp
config, show port lldp
Possible Default
Values Value
5-32768 30
tx-hold-multiplier,
config, show port lldp vlan-name
set port