Capture Stop - Avaya G250 Reference

CLI Commands
Examples
If the packet sniffing service has been enabled by the administrator:
G350-001(super)# capture start
Starting the packet sniffing process
If the packet sniffing service has not been enabled by the administrator:
G350-001(super)# capture start
The sniffing service is not available.
To re-enable, use the 'capture-service' command in supervisor mode.
Related commands
capture buffer-mode,
max-frame-size,
show capture,

capture stop

Use the capture stop command to stop the packet sniffing service.
Note:
This command is not saved in the startup configuration file.
Note:
Note:
In order to upload a capture file, you must first stop the packet sniffing service.
Note:
Syntax
capture stop
User level
read-write
Context
general
Examples
If the packet sniffing service has been enabled by the administrator:
G350-001(super)# capture stop
110 packets captured.
60 Avaya G250 and Avaya G350 CLI Reference
capture buffer-size,
capture stop, capture-service,
show capture-buffer hex
capture filter-group, capture
clear capture-buffer,
interface, capture
ip capture-list, name,