Ip Dhcp Client Client-Id - Avaya G250 Reference

Context
general
Example
To activate DHCP pool 5:
G350-001(super)# ip dhcp activate pool 5
To deactivate DHCP pool 5:
G350-001(super)# no dhcp activate pool 5
Related commands
clear ip dhcp-server
timeout, ip dhcp
dhcp-server statistics

ip dhcp client client-id

Use the ip dhcp client client-id command to specify the client-identifier for the DHCP
client. Use the no form of this command to restore the default value, which is the MAC address
of the interface.
Note:
To obtain the MAC address of the interface, use the show system command or
Note:
the show interfaces fastethernet 10/2 command.
Syntax
[no] ip dhcp client client-id {hex hex-string}
Parameters
Parameter
hex
hex-string
User level
read-write
binding, clear ip dhcp server
pool, ip dhcp-server, show ip
Description
Keyword indicating that a
hex string specifies the
class identifier for the
DHCP client
A Hex string specifying the
class identifier for the
DHCP client
Alphabetical listing of CLI commands
statistics, ip dhcp ping
dhcp-pool, show ip dhcp-server
Possible Values
string, 1-80 bytes
packets, ip dhcp ping
bindings, show ip
Default Value
01: MAC address
of the interface
Issue 1.1 June 2005 233