Snmp-Server View - Avaya G250 Reference

CLI Commands

snmp-server view

Use the snmp-server view command to configure settings for an SNMP MIB view. If the
view does not exist, it is created. A MIB view specifies a particular section or subsection of the
MIB tree. You can create a view that includes a particular subsection, or excludes one.
Syntax
snmp-server view viewname oidtree {included|excluded}
no snmp-server view viewname [oidtree]
Parameters
Parameter
viewname
oidtree
included
excluded
User level
admin
Context
general
Example
G350-001(super)# snmp-server view internet 1.3.6.1 included
Related commands - SNMP access configuration
ip snmp-server,
snmp, show snmp
snmp user, show snmp user
community, snmp-server
user
752 Avaya G250 and Avaya G350 CLI Reference
Description
The name of the view
The subtree to be included in or excluded
from this view. Oidtree is specified as a
series of period-separated numbers. In
order to include a subtree family, use an
asterisk as a wildcard character. Symbolic
MIB object names are not supported.
Keyword indicating that the view includes
the specified subtree (this is the default).
Keyword indicating that the view excludes
the specified subtree.
set snmp community,
engineID, show snmp
summary,
engineID, snmp-server
set snmp retries, set snmp
group, show snmp
show snmp usertogroup,
group, snmp-server
Possible Default
Values Value
timeout, show port
retries, show snmp timeout,
show snmp view,
remote-user,
trap, show
show
snmp-server
snmp-server