Tunnel Ttl - Avaya G250 Reference

CLI Commands

tunnel ttl

By default, GRE packets are given a ttl value of 255, since there is an unknown number of hops
to reach the tunnel endpoint. Use the tunnel ttl command to override this default. Use the
no form of the command to use the default ttl value.
Syntax
tunnel ttl ttl
no tunnel ttl
Parameters
Parameter
ttl
User level
read-write
Context
Interface: Tunnel (L2, L2-L3)
Example
G350-001(super)# tunnel ttl 16
Related commands
keepalive (GRE
path-mtu-discovery,
788 Avaya G250 and Avaya G350 CLI Reference
Description
The ttl value to be used instead of the
default ttl value of 255
tunnel), tunnel checksum,
tunnel source
tunnel destination, tunnel
Possible Default
Values Value
1-255
key, tunnel