Snmp-Server Remote-User - Avaya G250 Reference

CLI Commands
User level
admin
Context
general
Example
G350-001(super)# snmp-server informs retries 5 timeout 3
Related commands - SNMP access configuration
ip snmp-server,
snmp, show snmp
snmp user, show snmp user
community, snmp-server
user, snmp-server view
Related commands - SNMP trap configuration
clear snmp trap,
enable notifications,
Related commands - Dynamic trap manager
snmp-server dynamic-trap-manager

snmp-server remote-user

Use the snmp-server remote-user command to configure settings for a remote SNMPv3
user. If the user does not exist, it is created. Use the no form of the command to remove the
user from specific groups. If no groups are specified, the user is removed from all groups.
Syntax
snmp-server remote-user username SNMPEngineID groupname {v1|v2c|v3}
[auth {md5|sha} auth-password [priv des56 priv-password]]
no snmp-server remote-user username [groupname {v1|v2c|v3}]
748 Avaya G250 and Avaya G350 CLI Reference
set snmp community,
engineID, show snmp
summary,
engineID, snmp-server
set port trap, set snmp
snmp-server host
set snmp retries, set snmp
group, show snmp
show snmp usertogroup,
group, snmp-server
trap, show snmp, snmp trap
timeout, show port
retries, show snmp timeout,
show snmp view,
remote-user,
link-status, snmp-server
trap, show
show
snmp-server
snmp-server