Show Ip Route Static - Avaya G250 Reference

show ip route static

Use the show ip route static command to display static routes.
Syntax
show ip route static [ip_addr [mask]]
Parameters
Parameter
ip_addr
mask
User level
read-only
Context
general
Example
To display all static routes:
G350-001(super)# show ip route static
To display a single static route:
G350-001(super)# show ip route static 137.32.50.13
To display a range of static routes:
G350-001(super)# show ip route static 137.44.50.13 255.255.255.0
G350-001(super)# show ip route static
Showing 1 rows
Network Mask Interface
------- ---- ----------
0.0.0.0 0
where Pref is the preference, and Perm is Permanent.
Related commands
clear ip route, ip
route summary,
Description
The IP address of the routes
The IP mask of the routes
Next-Hop
-----------
FastEth 1 149.49.75.1
default-gateway, ip route,
traceroute
Alphabetical listing of CLI commands
Cost Pref
---- ----
1 low
show ip route, show ip route
Possible Default
Values Value
Perm Active
---- -------
No Yes
best-match, show ip
Issue 1.1 June 2005 617