Pppoe-Client Service-Name - Avaya G250 Reference

User level
Read-write
Context
Interface: Fast Ethernet
Example
G350-001(super-if:FastEthernet 10/2)# pppoe-client persistent
max-attempts 0
Related commands
encapsulation pppoe, mtu,
pppoe-client persistent
authentication

pppoe-client service-name

Use the pppoe-client service-name command to set the PPPoE Client service-name.
You can use the pppoe-client service-name command to force the PPPoE client to
connect only to access concentrators that support a specific service-name. If not set, the
PPPoE client attempts to automatically discover the service name by initiating PADI frames with
a blank service name.
Syntax
pppoe-client service-name string
no pppoe-client service-name string
Parameters
Parameter
string
User level
Read-write
Context
Interface: Fast Ethernet
ppp chap hostname,
delay, pppoe-client service-name,
Description
The service name
Alphabetical listing of CLI commands
ppp chap password, ppp pap-sent
pppoe-client
username,
wait-for-ipcp, show ppp
Possible Default
Values Value
Issue 1.1 June 2005 355