Pre-Classification - Avaya G250 Reference

Related commands
encapsulation pppoe, mtu,
pppoe-client persistent
show ppp authentication

pre-classification

Use the pre-classification command to specify which priority tag the current QoS list
uses for data flows. Use the no form of the command to reset the QoS list to use the default
priority tag, trust-cos-dscp.
Syntax
pre-classification tag_type
no pre-classification
Parameters
Parameter
tag_type
User level
read-write
Context
ip qos-list
Example
To specify that the current QoS list uses the dscp priority tag:
G350-001(QoS 440)# pre-classification trust-dscp
Related commands
ip access-control-list,
show ip access-control-list,
ppp chap hostname,
delay, pppoe-client persistent
Description
The type of priority tag used with
data flows
ip access-group, ip policy-list-copy,
show ip qos-list
Alphabetical listing of CLI commands
ppp chap password, ppp pap-sent
max-attempts, pppoe-client
Possible Values
untrusted,
trust-cos,
trust-dscp,
trust-cos-dscp
ip qos-group,
username,
service-name,
Default
Value
ip qos-list, ip simulate,
Issue 1.1 June 2005 357