Busyout Voip-Dsp; Cablelength Long - Avaya G250 Reference

To clear the bootfile definition:
G350-001(DHCP 5)# no bootfile
Related commands
client-identifier, default-router, dns-server, domain-name, end-ip-addr, lease, name,
next-server, option, server-name,
vendor-specific-option

busyout voip-dsp

Use the busyout voip-dsp command to put the VoIP engine in busyout (not available) state
for a Bit Transfer Rate test.
Note:
Status changes made during the test create SNMP traps.
Note:
Syntax
busyout voip-dsp
User level
read-write
Context
general
Related commands
release voip-dsp,

cablelength long

Use the cablelength long command to configure transmit and receive levels for a cable
longer than 655 feet. Use the no form of the command to restore the transmit and receive levels
to their default values.
Syntax
cablelength long rx_level tx_level
no cablelength long
show ip
show voip-parameters,
Alphabetical listing of CLI commands
dhcp-pool, start-ip-addr, subnet-mask, value,
test voip-dsp
Issue 1.1 June 2005 53