Accessing The S8300 Media Server Web Interface And Device Manager Over An Ethernet Interface; Hardware And Software Requirements - Avaya G700 Welcome Manual

10 . Enter the CLI commands appropriate for this interface. For example, you could:
- Type Linux shell commands to set up Operations Support System (OSS) alarm notification on
the S8300 Media Server.
- Type sat or dsat to log in to the SAT program. See
procedure.
- Type telnet <IP address> to access another device, such as any other administered
Media Gateway or Layer 2 Switching Processor.
Accessing the S8300 Media Server Web
Interface and Device Manager over an Ethernet
Interface
This section covers how to access the S8300 Media Server Web Interface or the Device Manager over an
Ethernet interface. Information includes:
•

Hardware and software requirements

• S8300 Media Server login procedure
• Device Manager login procedure
Hardware and software requirements
To successfully access one of these browser-based tools, your computer must have:
• A valid physical connection to the S8300 Media Server (for the S8300 Media Server Web
Interface), or to the G700 Media Gateway (for Device Manager). See
interface, on page 38
• A compatible Internet browser:
- Device Manager: supports Microsoft Internet Explorer 5.0 (or higher) and Netscape
Navigator 4.7 and 6.2 browsers. The Java Plug-in 1.2.2 or 1.3.1 is required.
- S8300 Media Server: requires either:
• Microsoft Internet Explorer 5.x (5.5 is recommended). IE 6 is not currently supported.
Internet Explorer 5.5 with Service Pack 2 (SP2) is required for initial configuration of
the S8300 Media Server.
• Netscape Navigator 4.7 or a later version of 4.x. Netscape 4.77 has been tested; other
versions may work. Netscape 6 is not currently supported.
Welcome to S8300/S8700 and G700
555-234-200 — Issue 2 — October 2002
for details.
Access Procedures: Specific Access Procedures
Accessing SAT from a CLI
Connecting to an Ethernet
for this
29