Set Up System Access - Avaya CMC1 Installation, Upgrades And Additions

Set Up System Access

Set Up System Access
To administer the Avaya CMC1 Media Gateway, you must be able to access the
system. Avaya CMC1 Media Gateways do not require a dedicated management
terminal. A PC/laptop equipped with Avaya Site Administration is the primary
support access for system initialization, aftermarket additions, and ongoing
maintenance.
The following sections describe
Installing and using Avaya Site Administration
Connecting a PC
Installing and using Avaya Site Administration
To install Avaya Site Administration, your laptop/PC must meet the minimum
requirements described in
Table 1-6. Minimum requirements for Avaya Site Administration
Operating systems:
MS Windows 95
MS Windows 98
MS Windows NT 4.0
MS Windows 2000
Graphics adapter
Floppy disk drive
CD-ROM
Available hard disk space
Printer port
Network adapter
555-233-118
Table 1-6:
Processor/RAM:
486SL/66/16 MB
Pentium/32 MB
Pentium/64 MB
Pentium-class 300 MHz/64 MB
SVGA with minimum screen resolution of 800 x
600
3-1/2 in. 1.44-MB floppy disk drive
CD-ROM drive (required to install Avaya Site
Administration from CD)
A minimum of 100-MB free hard disk space is
required. The requirement for disk space
depends on the size and number of
configuration data sets.
Standard PC or network printer port is required
for connecting to a printer to produce station
button labels.
May be required for network access to AUDIX
and other network-connected systems.
Continued on next page
Issue 5 October 2002
1-45