Ip Codec Set - Avaya G450 Manual

Configuring V.150.1 in Communication Manager
10. In the Modem field, type v150mr.
11. Access Page 3.

IP codec set

Specifies the type of codec used for voice encoding and companding (compression/
decompression).
The default codec is set for G711. The G711 provides the highest voice quality, but it uses the
most bandwidth. The G711 default setting can be changed to other codecs if the G711 does
not meet your required voice-quality/bandwidth trade-off specification.
Example command:
Related topics:
IP codec set: page 2
IP codec set: page 3
14 Configuring V.150.1 on the Avaya G450 Branch Gateway
FAX
Modem
TDD/TTY
Clear Channel
You must enter v150mr in the Modem field before you can access Page 3.
For example:
change ip-codec-set 1
Note: Maximum SPRT Payload sizes may vary across different gateways
dependent on firmware/hardware version
SPRT Payload Sizes (bytes)
SPRT Window Sizes (packets)
SPRT Timer TA01 (msec)
SPRT Timer TA02 (msec)
SPRT Timer TR03 (msec)
SPRT Retransmissions: 3
SSE Repetition Redundancy (packets): 3
SSE Inter-Packet Interval (ms): 20
Modem Relay Preferred (NoAudio)? N
Modulation Mode
V.32? y V.34? y
change ip-codec-set n
on page 15
on page 19
Comments? infodev@avaya.com
off
v150mr
US
n
V.150 MODEM RELAY PARAMETERS
TC0 TC1
140 132
- 32
- 90
- 130
- 500
V.90? n V.92? n
, where n is the codec set number.
0
0
3
0
Page
TC2 TC3
132 140
8 -
90 -
500 -
500 -
V.42 Error Correction? n
3 of 3
July 2012