Chapter 6: Management, security, alarms
Management applications
You can use the following applications to manage Branch Gateway:
• Command Line Interface (CLI)
• Avaya Branch Gateway Manager
• Avaya Integrated Management
Avaya management tools are supported only in IPv4.
Branch Gateway Command Line Interface
You can use CLI to configure Branch Gateway and its media modules. CLI is a textual command-
prompt interface. It is similar to the command-line interface of other network devices.
You can access CLI using one of the following methods:
• Telnet through the network.
• Telnet through dialup, using a dialup PPP network connection.
Telnet is disabled by default on Branch Gateway.
• A console device connected to the Console or Services port on the Branch Gateway front
panel.
• SSH, which you can use to establish a secure remote session over the network, Services
port, or dial-in modem (PPP).
SSH is enabled by default.
Telnet and the Services port are supported only in IPv4.
For information about CLI commands, see Avaya Branch Gateway G450 CLI Reference.
For information about how to perform specific configuration tasks using CLI, see Administering
Avaya G450 Branch Gateway.
April 2020
and troubleshooting
Avaya G450 Branch Gateway Overview and Specification
Comments on this document? infodev@avaya.com
47