Introduction; Figure 38: X330-20Gtx Switch With Rkmt-J13 Equipment Rack Brackets Kit - Allied Telesis x330-52GTX Installation Manual

Chapter 4: Installing the x330-20GTX Switch in an Equipment Rack

Introduction

86
Installing the x330-20GTX Switch in a standard 19-inch equipment rack
requires the RKMT-J13 equipment rack brackets kit. The kit allows you to
install the switch with the front panel flush with or recessed 50mm (2 in.)
behind the front of the equipment rack. Refer to Figure 38. The kit is sold
separately.
Figure 38. x330-20GTX Switch with RKMT-J13 Equipment Rack Brackets
Note
You can install the x330-28GTX Switch in an equipment rack with
either the two equipment rack brackets that come with the unit or the
RKMT-J13 kit.
Kit