Introduction; Figure 26: X330-10Gtx Switch In An Equipment Rack With The Rkmt-J05 Brackets Kit - Allied Telesis x330 Series Installation Manual

Chapter 3: Installing the x330-10GTX Switch in an Equipment Rack

Introduction

Installing the x330-10GTX switch in a standard 19-inch equipment rack
requires the RKMT-J05 equipment rack brackets kit. The brackets allow
you to install the switch with the front panel flush with the front of the
equipment rack or with the switch projecting in front of the rack. Refer to
Figure 26. The kit is sold separately.
Figure 26. x330-10GTX Switch in an Equipment Rack with the RKMT-J05
Brackets Kit
58