Table of Contents
Advertisement
Chapter 3: Installing the GS970EMX/10 Switch in an Equipment Rack
Introduction
Installing the GS970EMX/10 Switch in a standard 19-inch equipment rack
requires the RKMT-J05 equipment rack brackets kit. The brackets allow
you to install the switch with the front panel flush with the front of the
equipment rack or with the switch projecting in front of the rack. Refer to
Figure 26. The kit is sold separately.
Figure 26. GS970EMX/10 Switch in an Equipment Rack with the RKMT-
J05 Brackets Kit
58
Advertisement
Table of Contents
