Introduction; Figure 14: Gs970Emx/10 Switch In An Equipment Rack With The Rkmt-J05 Brackets Kit - Allied Telesis GS970EMX/10 Installation Manual

Chapter 3: Installing the GS970EMX/10 Switch in an Equipment Rack

Introduction

Installing the GS970EMX/10 switch in a standard 19-inch equipment rack
requires the optional RKMT-J05 equipment rack brackets kit. The brackets
allow you to install the switch with the front panel flush with the front of the
equipment rack or with the switch projecting in front of the rack. Refer to
Figure 14.
Figure 14. GS970EMX/10 Switch in an Equipment Rack with the RKMT-
J05 Brackets Kit
50