Bgp Log-Neighbor-Changes - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

bgp log-neighbor-changes

Syntax
Release Information
Description
Mode
292
[ no ] bgp log-neighbor-changes
Command introduced before JunosE Release 7.1.0.
Causes BGP to log a message of severity notice to the bgpNeighborChanges log whenever
a peer enters or leaves the Established state for any reason. No other messages are
logged to the bgpNeighborChanges log. The no version disables this log.
Router Configuration
Copyright © 2010, Juniper Networks, Inc.