Monitoring The Statistics Of Vrrp Routers; Table 26: Show Ip Vrrp Neighbor Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SERVICE AVAILABILITY CONFIGURATION GUIDE 2010-10-08 Configuration Manual

Meaning
Related
Documentation

Monitoring the Statistics of VRRP Routers

Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
priority: 255 (owner)
auth type: none
assoc address(es): 10.0.0.1, 100.0.0.1, 101.0.0.1
Interface: fastEthernet5/0.1 vrrpVrid: 11
time discovered: 08/09/2001 07:44
primary address: 11.0.0.1
adv interval (sec): 1
priority: 255 (owner)
auth type: none
assoc address(es): 11.0.0.1, 110.0.0.1, 111.0.0.1
Table 26 on page 163 lists the show ip vrrp neighbor command output fields.

Table 26: show ip vrrp neighbor Output Fields

Field Name
Interface
time discovered
primary address
adv interval (sec)
Priority
auth type
assoc address(es)
VRRP Overview on page 149
Before You Configure VRRP on page 156
Configuring VRRP on page 157
Display global statistics, interface statistics, or statistics per interface and VRID of
configured VRRP routers.
To display the statistics per interface:
host1#show ip vrrp statistics interface fastEthernet 4/0
Globals:
checksumErrors: 0
versionErrors: 0
vrIdErrors: 1
iccErrors: 0
Field Description
Fast Ethernet, Gigabit Ethernet, or 10-Gigabit Ethernet
interface specifier and VRID of neighbors known to
the VRRP router.
Date and time that the neighbor was detected
Primary IP address of neighbor
VRRP advertisement interval in seconds
Priority status of VRRP router. If the priority value is
255, then the VRRP router is the master.
VRRP authentication type: none or text
IP addresses associated with the VRID that are
advertised by the neighbor
Chapter 6: Configuring VRRP
163