Neighbor Allowas-In - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

neighbor allowas-in

neighbor { ipAddress | ipv6Address | peerGroupName } allowas-in number
Syntax
no neighbor { ipAddress | ipv6Address | peerGroupName } allowas-in [ number ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
ipv6Address variable added in JUNOSe Release 8.0.0.
Specifies the number of times that the AS path of a received route may contain the
Description
recipient BGP speaker's AS number and still be accepted. The no version restores
the default state, which is to reject as a loop any route whose path contains the
speaker's AS number. IBGP peers in the VPNv4 address family always accept these
routes, regardless of the command configuration.
Options
Router Configuration
Mode
ipAddress IP address of BGP neighbor
ipv6Address IPv6 address of BGP neighbor
peerGroupName Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.
number Number in the range 1–10
Chapter 2: N Commands
29
neighbor allowas-in