Neighbor Send-Community - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

neighbor send-community

[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } send-community
Syntax
[ standard | extended | both ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
ipv6Address variable added in JUNOSe Release 8.0.0.
Enables a BGP speaker to send a community attribute to the peer. The no version
Description
causes the speaker to send only standard communities to the peer. The default
version removes the explicit configuration from the peer or peer group and
reestablishes inheritance of the feature configuration.
Options
Address Family Configuration, Router Configuration
Mode
62
neighbor send-community
ipAddress IP address of BGP neighbor
ipv6Address IPv6 address of BGP neighbor
peerGroupName Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command. You cannot override the
characteristic for a specific member of the peer group.
standard Sends only standard communities
extended Sends only extended communities
both Sends both standard and extended communities