Send - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

send

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
send send-options;
[edit logical-systems logical-system-name protocols rip],
[edit logical-systems logical-system-name protocols rip group group-name neighbor
neighbor-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
rip],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
rip group group-name neighbor neighbor-name],
[edit protocols rip],
[edit protocols rip group group-name neighbor neighbor-name],
[edit routing-instances routing-instance-name protocols rip],
[edit routing-instances routing-instance-name protocols rip group group-name neighbor
neighbor-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure RIP send options.
send-options —One of the following:
—Broadcast RIP version 2 packets (RIP version 1 compatible).
broadcast
multicast —Multicast RIP version 2 packets. This is the default.
none —Do not send RIP updates.
—Broadcast RIP version 1 packets.
version-1
Default: multicast
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
receive on page 2160
Configuring RIP Update Messages
Chapter 79: Configuration Statements for Layer 3 Protocols
2189