Monitoring The Connect-Info Radius Attribute; Monitoring The Nas-Port-Id Radius Attribute; Monitoring Included Radius Attributes - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

Monitoring the Connect-Info RADIUS Attribute

Purpose
Action
Related Topics

Monitoring the NAS-Port-ID RADIUS Attribute

Purpose
Action
Related Topics

Monitoring Included RADIUS Attributes

Purpose
Action
host1# show radius attributes-included
Attribute Name
--------------------------
acct-authentic
acct-delay-time
acct-link-count
acct-multi-session-id
acct-session-id
acct-terminate-cause
acct-tunnel-connection
ascend-num-in-multilink
called-station-id
calling-station-id
class
connect-info
delegated-ipv6-prefix
dhcp-options
dhcp-option-82(vsa)
dhcp-mac-address
dhcp-gi-address
Copyright © 2010, Juniper Networks, Inc.
Display the format for the Connect-Info attribute.
To display the format for the Connect-Info attribute:
host1(config)#show radius connect-info-format
l2tp-connect-speed-rx-when-equal
show radius connect-info-format
Display whether the router includes or excludes the subinterface number or adapter in
the interface description that the router passes to RADIUS for inclusion in the NAS-Port-Id
attribute.
To display information about the interface description for the NAS-Port-ID:
host1#show aaa intf-desc-format
exclude sub-interface
include adapter
show aaa intf-desc-format
Display the RADIUS attributes that are included in and excluded from Acct-On, Acct-Off,
Access-Request, Acct-Start, and Acct-Stop messages.
To display the list of included RADIUS attributes:
Account Account
On Off
------- -------
enabled enabled
enabled enabled
n/c n/c
n/c n/c
enabled enabled
n/c enabled
n/c n/c
n/c n/c
n/c n/c
n/c n/c
n/c n/c
n/c n/c
n/c n/c
n/c n/c
n/c n/c
n/c n/c
n/c n/c
Access Account Account
Request Start
-------- -------- --------
n/c n/c n/c
n/c n/c n/c
n/c enabled enabled
disabled enabled enabled
enabled n/c n/c
n/c n/c n/c
enabled enabled enabled
disabled disabled disabled
enabled enabled enabled
enabled enabled enabled
n/c enabled enabled
enabled enabled enabled
n/c disabled disabled
disabled disabled disabled
disabled disabled disabled
disabled disabled disabled
disabled disabled disabled
Chapter 8: Monitoring RADIUS
Stop
301