L2Vpn Local-Site-Id Remote-Site-Id - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

JunosE 11.2.x Command Reference Guide A to M

l2vpn local-site-id remote-site-id

Syntax
Release Information
Description
Options
Mode
Related Topics
1194
l2vpn l2VpnName local-site-id localSiteId remote-site-id remoteSiteId
no l2vpn l2VpnName
Command introduced in JunosE Release 8.1.0.
Configures a layer 2 interface as a member of a VPWS L2VPN by specifying local and
remote customer site IDs. The no version removes the interface as a member of the
VPWS L2VPN.
l2VpnName—Name of the VPWS instance
localSiteId—Numerical identifier for the local site in the VPWS L2VPN, in the range
1–65535
remoteSiteId—Numerical identifier for the remote site in the VPWS L2VPN, in the range
1–65535
Interface Configuration, Subinterface Configuration
Configuring Customer-Facing Interfaces in the L2VPN Instance in the JunosE BGP and
MPLS Configuration Guide
Copyright © 2010, Juniper Networks, Inc.