Aaa Tunnel Nas-Port-Method - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

aaa tunnel nas-port-method

Syntax
Release Information
Description
Mode
70
aaa tunnel nas-port-method cisco-avp
no aaa tunnel nas-port-method
Command introduced before JunosE Release 7.1.0.
Configures the tunnel's default NAS port type to provide limited support for a Cisco
proprietary vendor-specific method when configuring the LAC to LNS NAS port
identification transfer mechanism. The no version disables the command.
NOTE: Use of this feature is not recommended and continued compatibility
cannot be guaranteed.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.