Monitoring The Dsl-Port-Type Radius Attribute; Monitoring The Connect-Info Radius Attribute; Monitoring The Nas-Port-Id Radius Attribute - Juniper JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010 Configuration Manual
For e series broadband services routers - broadband access configuration
Hide thumbs
Also See for JUNOSE SOFTWARE 11.0.X - BROADBAND ACCESS CONFIGURATION GUIDE 4-1-2010:
- Configuration manual (712 pages)
Table of Contents
Advertisement
To display the format used for the Acct-Session-Id attribute:
Action
host1#show radius acct-session-id-format
decimal
Related Topics
Monitoring the DSL-Port-Type RADIUS Attribute
Display the DSL port type for NAS-Port-Type attribute for ATM and Ethernet users.
Purpose
To display the DSL port type for NAS-Port-Type attribute for ATM users:
Action
host1#show radius dsl-port-type
xdsl
To display the NAS-Port-Type attribute for Ethernet interfaces:
host1#show radius ethernet-port-type
virtual
Related Topics
Monitoring the Connect-Info RADIUS Attribute
Display the format for the Connect-Info attribute.
Purpose
To display the format for the Connect-Info attribute:
Action
host1(config)#show radius connect-info-format
l2tp-connect-speed-rx-when-equal
Related Topics
Monitoring the NAS-Port-ID RADIUS Attribute
Display whether the router includes or excludes the subinterface number or adapter
Purpose
in the interface description that the router passes to RADIUS for inclusion in the
NAS-Port-Id attribute.
To display information about the interface description for the NAS-Port-ID:
Action
show radius acct-session-id-format
show radius dsl-port-type
show radius ethernet-port-type
show radius connect-info-format
Chapter 8: Monitoring RADIUS
Monitoring the DSL-Port-Type RADIUS Attribute
301
Advertisement
Table of Contents
Troubleshooting
